Some car owners prefer to tint their car for the privacy it brings, and others opt for it to reduce car damages caused by heat and sunlight. While some cars are originally tinted from the manufacturer, others are not and will have to undergo certain procedures. Often, car dealerships tend to tint some of their cars so as to inflate prices, but it is always smart to buy a factory tint car or go to tint specialists like Tint World for professional and cheaper tinting. Some of the steps involved in getting a car tinted professionally include:
Cleaning the Work Space: Before starting the process, the workplace is usually thoroughly cleaned to make sure it is dust-free. It doesn’t matter if the environment already appears clean, it must be confirmed that dust has been removed as it could stick to the car windows and result in a messy job. For this reason, car tinting is often done indoors.
Window Prepping: Since tinting is really the darkening of car window glass to prevent light rays, then it is prepped for the procedures. This preparation is done to make sure the window is spotless. To achieve this, a couple of things are done, including removing stickers from the windows. The windows are also cleaned with soapy water to make sure the surface isn’t sticky completely. On top of using soapy water, a specialist might also decide to use a “1” razor blade. Once all this is done, a clean rag is used to dry the surface and remove bubbles.
Film Measurement and Cutting: The essential material needed in car tinting is film. A window film is basically a laminate material that is installed on the windows to darken it. Before installation, it is important to determine the adhesive part of the film. Once it has been determined, the film is placed on the window for accurate measurement. It is then cut to proper size along the edges of the window glass. A specialist is always extra careful while doing this since this sets the basis for everything that is to come. In this step, a heat gun is often used to make the film take the shape of the glass.
Detailing Using the Peel Board: After the film has been cut to size, it is cautiously removed and placed on the peel board. On the peel board, the specialist has the luxury to design and add a few details on the film without destroying the material. It is also during this process that a film liner is removed. Some tend to skip the step and simply do all they need to be done on the actual glass, but it is always best to use a peel board for a more pleasing result.
Film Installation: This is the final installation of the film on the window glass. The film is placed on the exterior surface of the window and smoothed alongside the edges. Before proceeding to place the film, specialists spray the film with soap water. A squeegee is used to spray the windows from the interior to get rid of the solutions under the film so as to make sure that the film adhesive is stimulated. The adhesive is what makes the film stick properly to the window glass.
Inspection: Inspecting a work once it is finished is an act that is adopted in all fields. Once a specialist is done with the film installation, the car becomes tinted. However, should in case any crease is noticed during inspection, there arises a need for correction or possibly a do-over depending on whatever the issue is.
Drying: Once a specialist has touched up the work, and he or she is satisfied with the result, all that is left is to wait for the film to dry up on the window. This could take days, and sometimes a car owner is required not to wind up or down the window glass for weeks just to make sure that everything dries well.
Car Tinting may seem like an easy task. However, it is very delicate hence the need to hire the services of a specialist to ensure satisfactory results. Regardless of whether or not a person is a professional involved in the procedure of tinting a car, it is never a bad idea to learn the process, especially if he or she decides to change the looks of his or her car. Getting acquainted with the steps involved will help understand what needs to be done and consequently avoid getting cheated.